Page
25
existing title, you will be asked if you want to overwrite the file.
5.
PC Setup Files—Save: In the PC Setup files area, click Save to save the
current configuration displayed in the Manager to the PC’s hard drive. When
the Save As dialog appears, browse to the folder where you wish to save the
file, and then click Save.
Note: This button has exactly the same functionality as the Save button on
the Ethernet tab. It is repeated here for your convenience.
6.
PC Setup Files—Open: In the PC Setup Files area, click Open to open a
file from the PC’s hard drive. The Open dialog will appear where you can
browse to the desired configuration file. When you press Open, this will
become the current configuration displayed in the Manager.
Note: This button has exactly the same functionality as the Open button on
the Ethernet tab. It is repeated here for your convenience.
7.
Programming Files—This pane relates to preparing a flash drive to be used
to update the software in AMP1-16-M units.
a.
Check for Updates: Clicking on this button checks the Wohler
website for updated software, and if it exists, it downloads it.
b.
Create Update on Flash Drive: Whether a new update was available
on the Wohler website or not, this button can be used to create a
software update on the attached USB flash drive. After this operation
is performed, AMP1-16-M units will recognize that an update is
available on the flash drive and will offer to update themselves from it.
Note: Units with software versions prior to 4.00 will not perform a software
update from a USB stick. This must be done using the Ethernet port.
