WOBIT ADT42, Руководство пользователя

Страница: 5 / 15

www.wobit.com.pl User manual -ADT42 – 23.06.2015 – v.1.3 page 5
Example of application with ADT42 module (silo weight measurement, weight platform)
2.2 Features

Signal measurement from four load cells

Result conversion into force in N or weight in g, kg, T, f

Read out of each channel separately or aggregate of all channels

Measurement filtering function

0-10V (ADT42-U) / (0)4-20mA (ADT42-I) output with calibration function

2 opt insulated inputs (general-purpose and tare)

2 transistor outputs with configurable thresholds

RS485 interface for communication with other devices in MODBUS-RTU protocol

USB connector for transducer configuration and measurement data acquisition
2.3 Description of connectors and diodes
Picture. 1 Connector and panel description
Nr Description
Analog output 0-10V/ 4-20mA
1 GND Ground of analog output
2 AOUT 0-10V / 4-20mA output
Opt insulated inputs
3 IN1 Input 1 (TARA)
4 IN2 Input 2 (M-TARA on/off, record)
5 COM Ground of opt insulated input
RS485 MODBUS-RTU
6 A
7 B Signal -
Transistor output
8 OUT1 Transistor output 1, max. 0,5A
9 OUT2 Transistor output 2, max. 0,5A
10 GND Ground of outputs
Power supply
11 VDC+ Power supply 12-24 VDC
12 GND Ground of power supply
Load cells inputs
13, 17, 21, 25 E+ Sensor power
14, 18, 22, 26 S+ Sensor
15, 19, 23, 27 S- Sensor signal -
16, 20, 24, 28 E- Sensor power supply -
Signaling diode description
PWR – Module power supply signaling COM - RS485 / USB communication signaling
TARA - IN1 input state (TARA) OUT1/2 - ½ output state