www.wobit.com.pl
User manual -ADT42 – 23.06.2015 – v.1.3
page 3
1.
Safety and assembly rules
1.1.
Safety rules
•
Prior to first start-up of the device carefully read the manual.
•
Prior to first start-up of the device make sure all cables are properly connected.
•
Provide appropriate working conditions, in compliance with the device
specifications (e.g.: power supply voltage, temperature, maximum current
consumption).
•
Prior to any modifications of cables connections, disconnect power supply voltage.
Usage of described device in special meaning systems (e.g.: medical applications, vehicles,
etc.) requires use of additional safety measures against operational errors.
This device can’t be used in open space. It can cause an electric shock and shorten lifetime of
the device.
•
Exceeding of recommended operational parameters can lead to damage of the device or to
fire.
Dismantling of the indicator housing during guarantee agreement period results in its
invalidation.
1.2.
Assembly recommendation
In the environments of unknown levels of interruptions it is recommended to use the following
means preventing against possible interruptions of the device operation:
Ground or zero the metal rails on which instruments are mounted,
•
Do not power the device from the same lines as high power devices without appropriate
network filters.
•
Apply power supply, sensor and signal cables screening while screen grounding should be
connected only on one side as close to the device as possible.
For power supply of the motor please use twister pair of cables, if possible equipped with
filters in the form of ferrite beads.
•
Avoid routing control (signal) cables in parallel with or in close vicinity of power and supply
cables.
•
Avoid close vicinity of devices generating high level of electromagnetic and/or pulse
interference (high power loads, loads with phase or group power regulation).
