WMF 1500S+ Скачать руководство пользователя страница 87

Страница: 87 / 120

User Manual WMF 1500 S +

Care | Manual cleaning

5.5.4 Clean the water tank

Thoroughly rinse water tank weekly with clear water.

5.5.5 Clean the drip tray

Scalding hazard

•

The drip tray may contain hot liquids.

•

If the drip tray is not properly engaged, such
as after cleaning, there is a burn hazard due
to hot liquids.

> Be careful when moving the drip tray.

> Replace carefully so that no water

accidentally drips down.

> Always make sure the drip tray is seated

correctly.

Lift up the front of the drip tray slightly
and remove it

Clean drip tray thoroughly

Rinse the drip tray with clear drinking water

Dry off the drip tray and replace it

5.5.6 Clean the housing

•

There is a risk of causing scratches or scoring.

> Do not clean with scouring powders or

the like.

> Do not use any sharp cleaners or implements.

> Use soft cloths for cleaning.

For cleaning metal cover parts (matte surface)
we recommend WMF Purargan® cleaner.

CaUtion

Follow the Safety chapter

starting on page 7

iMportant

Follow the Warranty chapter

starting on page 108

Содержание 1500S+

























































































































Результаты поиска

Содержание 1500S+

Отзывы:

Похожие инструкции для 1500S+

Бренды по названию

Популярные бренды

WMF 1500S+, Руководство пользователя

Результаты поиска

Содержание 1500S+

Отзывы:

Похожие инструкции для 1500S+

Бренды по названию

Популярные бренды