WMF 1500S+ Скачать руководство пользователя страница 104

Страница: 104 / 120

104

User Manual WMF 1500 S +

Safety and warranty

9 Safety and warranty

9.1 Hazards to the coffee machine

Follow the manual

We do not accept any warranty for damage
resulting from failure to observe this
requirement.
Follow the conditions for use and installation.

installation location

•

The installation location must be dry and
protected against water spray.

•

Some condensate, water, or steam can always
be discharged from a coffee machine.

> Do not use the coffee machine outdoors.

> Set up the coffee machine so that it is

protected against water spray.

> Always place the coffee machine on a water-

resistant and heatproof base in order to
protect the installation surface against
damage.

Coffee grinder

•

Foreign objects can damage the grinders.
Such damage is not covered under the
warranty.

> Ensure that no foreign objects land in the

coffee bean hopper.

iMportant

Follow the Warranty chapter

starting on page 108

Conditions for use and installation

starting on page 17

Содержание 1500S+

























































































































Результаты поиска

Содержание 1500S+

Отзывы:

Похожие инструкции для 1500S+

Бренды по названию

Популярные бренды

WMF 1500S+, Руководство пользователя

Результаты поиска

Содержание 1500S+

Отзывы:

Похожие инструкции для 1500S+

Бренды по названию

Популярные бренды