-
Server
IP
address
–
Destination server IP address, where you would like to send
the counted and collected data.
-
Server
port
–
Server port number (of the transmitting
destination’s address).
-
Data packet protocol
–
You can choose from
TCP or UTP
-
Data sending interval
–
Data transmitting cycle or period to send data to the
remote IP address (server). By default the data sending will be retrying 3
times to
send the data to the destination address, because the Narrow Band network is not
available all the time.
-
Destination server protocol -
You can choose from
GRF (Grafana server),
TCP,
MQTT, LwM2M (Lighweight M2M, Leshan).
-
Data storage frequency
- define the cycle of data storage in the memory
–
it
shoud be set to more frequented as the
Data sending interval
parameter.
-
Data storage cycle counted by
–
here you can define the base of the time
adjustment type (you can selet that it will be calculated by the spent time since
the device start or by the GMT time).
