-
Delta pulse sending [pulse]
: the max. pulse amount can be configured here.
When the number of incoming pulses reached / exceeded this value, the modem
will transmitting the data immediately
–
it’s not necessary to use this feature (if
you don’t want to use it, just leave the value on „0”)
- or configure the data
transmission (e.g.
for every „100” pulse
- when it will be exceeded, the modem will
send the current consumption value immediately.
Set the desired parameters and press the
OK
button.
3.10 MBUS settings
You can configure the following fields at the
MBUS settings
parameter group for
MBUS-capable meters (you need to use the MBUS addon board
–
order option):
-
MBus data speed rate [baud]
–
you can add the data speed rate here
-
MBus data sending delay
–
when the MBUS meters needed to be wake up - that
the MBUS data will be surely received by the WM-I3 - in time.
