Important!
After the parameter writing/sending, the device will be disconnected
and it will be rebooting, then operating according to the new settings
–
which takes
about 1-2 minutes. Wait until the device will be available again in the WM-E Term.
3.7 Cellular network settings
You must configure the following fields for the proper operation at the
Cellular
network settings
parameter group:
-
APN
-
APN username
-
APN password
(if exists)
-
SIM PIN
(if the SIM uses a PIN code)
-
Cellular band(s):
you can select
if you want to use a dedicated bands
–
according
to the Region where you will use it - or you can left it empty for automatic
detection.
