Step #3
: Open up the SIM holder (5) from right-to-left and insert an activate SIM card
(which uses APN). Take care to the direction, the SIM card must be inserted from right
side to the direction of the battery, and the SIM chip looks down, the cutted edge of
the SIM is oriented to the Telit internet module.
Close back the SIM holder’s cover.
Step #4:
The J12 interface connection can be used for local configuration and firmware
refresh by using the configuration cable (17).
Step #5:
The configuration cable’s (17) black connector must be placed to
the WM-I3
mainboard’s
J17 Connection interface (5-pins), according to the next photos. The black
connector’s 1st pin is signed by a white mark, this side of the connector must be placed
closer to the battery (oriented left on the photo).
Step #6:
For the serial connection to a computer you have to connect the
USB UART
Converter
adapter (16) of the configuration cable to a PC.
17
A
16
17
A
7
A
