u
v
w
A
I
≈
45% I
N
-
U
Gearless Lift Machine
WSG-S2.4
Operating Instructions
Code
GM.8.003290.EN
Date
13.06.2016
Version
0.10
Page
7
Subject to changes without notice ! Subject to changes without notice !
EN
3.2. Transport and storage
• The lift machines leave the factory in perfect condition after being tested.
• Make a visual check for any external damage immediately upon their arrival on site. If any damage is found
to have occurred in transit, make a notice of claim in the presence of the carrier. If appropriate, do not put
these machines into operation.
• Observe the relevant safety regulations and take the centre of gravity into account when handling the lift
machines.
• Check that the eyebolts are tightly fitted before using them.
• Do not expose the motor to any shocks or impact.
Storage
• Store the motors only in closed, dry, dust-free, well-ventilated and vibration-free rooms (storage tempera -
ture: -20°C to 60°C). Do not store lift machines in the open air. Bright parts are not sufficiently preserved to
withstand extended periods of exposure.
• Avoid excessive storage periods (recommendation: max. one year).
• After prolonged storage (>3 months), rotate the motor in both directions at a low speed (< 20 min
-1
) to
allow the grease to distribute evenly in the bearings.
• Measure the insulation resistance before initial operation of the machine. If the value has dropped below
1k
per volt of rated voltage, the winding needs to be dried (insulation meter voltage: 1,000 V DC).
• This can be done, for instance, with hot air, in a drying oven, or by applying a DC voltage to the motor con-
nections. Make sure that the voltage selected does not exceed the values shown in the figure "Drying the
winding". Let the temperature rise to about 70 – 80°C and maintain it for several hours.
Warning
The eyebolts are designed for the specified machine weight, i.e. additional loads must not be
applied. Danger of breakage!
Drying the winding
Unpacking
• Dispose of the packaging material in an environmentally friendly manner or reuse it.
• Any special transport aids or shipping braces are left with the customer.
3.3. Disposal
• The lift machines consist of different materials. A waste separation of those different material components
has to be done.
• The disposal must be professional and environmentally friendly according to law.
