Gearless Lift Machine
WSG-S2.4
Operating Instructions
Code
GM.8.003290.EN
Date
13.06.2016
Version
0.10
Page
4
Subject to changes without notice ! Subject to changes without notice !
EN
1.
General information
2.
Safety instructions
2.1. General
WSG-S2 lift machines are not ready-to-use products; they may only be operated after they have been installed
in lift systems and their safe operation has been ensured by taking the appropriate measures.
WSG-S2 lift machines are intended for use in an enclosed, lockable operating area to which only qualified
personnel and personnel authorised by the customer have access.
1.1. About this operating manual
The purpose of this operating manual is to ensure that any work on WSG-S2 lift machines is carried out safely.
Please regard it as part of the product and keep it within easy reach.
All persons working on or with WSG-S2 lift machines must have read and understood this operating manual.
1.2. Intended use
WSG-S2 lift machines are intended for use as gearless drives for rope lifts. They may only be used for their
intended purpose and with all safety devices in proper working order.
They may only be operated under the conditions described in this manual and with due regard to their perfor-
mance limits.
1.3. Scope of delivery
The WSG-S2 lift machines are customised to meet individual requirements. The exact scope of delivery can be
found in the accompanying documentation.
1.4. Warranty and liability
Our "Conditions of Sale and Delivery" shall apply for all our supplies and services.
Any warranty claims must be made immediately upon discovery of the deficiency or defect.
We do not accept any warranty or liability claims for personal injury or property damage resulting from one or
more of the following causes
• Improper use of the WSG-S2 lift machine
• Improper installation, commissioning, operation or maintenance
• Operation of the WSG-S2 with defective and/or inoperative safety or protective devices
• Non-compliance with the instructions contained in the operating manual or other documentation supplied
• Unauthorised construction modifications to the WSG-S2
• Insufficient monitoring of parts subject to wear
• Repairs carried out improperly
• Emergencies caused by external forces or force majeure
