Wisper 705 TORQUE, Руководство пользователя

Страница: 28 / 30

6. Pre Delivery Inspection check list
The PDI is a critical part of the overall Quality Assurance process and must be completed
by the supplying dealer followed by a test ride and sign off before passing the bike to the
customer.
The following items below are a generic list for all current Wisper models and must be
covered during the PDI.
Item
Check
off
by No.
Activity
Mechanical Parts
Notes
1 Check front and rear wheel for alignment and
run out Tighten spokes if necessary
2 Check tightness of rear axle nuts and front
quick release Tighten to torque setting in
user manual
4 Check tyre pressures front and rear Inflate to correct pressure
5 Check and adjust action of front and rear
brakes Ensure there is no noise or
squeal
6 Check smooth action and adjustment of front
suspension forks
7 Check adjustment of bearings in headstock Adjust if necessary
8 Check security of all handlebar stem fixings and
clamps Adjust to suit customer
preferences
9 Check front and rear mudguards for security
and clearance from tyres
10 Check all cables are clipped securely and safely Check motor cable cannot
rub against the tyre
12 Check pedals have been fitted correctly and
tightened fully Note left and right hand
threads
13 Check pedal cranks have been tightened fully
on bottom bracket axle. Tighten to torque setting in
user and service manual
14 Check smoothness and running clearance of
bottom bracket
28