Wisper 705 TORQUE, Руководство пользователя

Страница: 7 / 30

2.1.7 Load the battery into bicycle and turn on with the switch located at the rear right
hand side of the battery. To remove the battery turn the battery key hold in
unlocked position and slide the battery out. Remove key from battery and keep
save during operation of the bike.
2.1.8 Turn on the bike by pressing the on/off switch adjacent to the left hand grip for
two seconds. (Turn off the bike by repeating the same process).
Fig 1
The bike will be ready to ride and the LCD will activate showing battery state,
assist level, time, trip and speed. Exerting pressure on the pedals or twisting the
throttle will now activate the motor.
Fig 2
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set
to 0 when mounting, dismounting and turn the bike off when leaving it unattended.
To set the assist levels, toggle with the + and – buttons (see fig 1)
2.1.10 For full information regarding the XT-LCS W108 LCD display please refer to
separate hand book available from Amps Electric Bikes or your retailer.
7