WirelessHART Rosemount 2160 WirelessHART, Справочное руководство, Страница: 49 / 100

Reference Manual
00809-0100-4160, Rev AB
March 2010
3-7
Rosemount 2160
Installing the
LCD Display
Switches ordered with the LCD display are shipped with the display installed.
NOTE
An LCD from a wired device will not function in a wireless device .
Only use Rosemount Wireless LCD Part Number: 00753-9004-0002
In addition to housing rotation, the optional LCD display can be rotated in 90°
increments by squeezing the two tabs, pulling out, rotating and snapping back
into place.
If LCD pins are inadvertently removed from the interface board, carefully
re-insert the pins before snapping the LCD display back into place.
Use the following procedure and Figure 3-7 to install the LCD display:
1. Remove the battery cover and battery (Figure 3-6.)
2. Remove the cover opposite the field terminal side. Do not remove the
covers in hazardous environments when the circuit is live.
3. Engage the four-pin connector into the LCD display and snap into place.
Note the following LCD temperature limits:
• Operating : –40 to 175 °F (–20 to 80 °C)
• Storage : –40 to 185 °F (–40 to 85 °C)
Figure 3-7.
Optional LCD Display
LCD
Display
Meter
Cover