WirelessHART Rosemount 2160 WirelessHART, Справочное руководство, Страница: 31 / 100

Reference Manual
00809-0100-4160, Rev AB
March 2010
2-13
Rosemount 2160
Sensor Fault Delay
When the 2160 is operating in Enhanced Mode and detects a fork sensor
fault,
Sensor State (page 2-17) indicates a Fault state after a delay set by
Sensor Fault Delay .
The default setting is 600 seconds. It can be a maximum of 3600 seconds.
NOTE
When the 2160 is operating in Normal Mode, a fork sensor fault is not
detected and
Sensor State (page 2-17) continues to indicate a Valid state.
To change or view the sensor fault delay:
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup .
3. Select 2: Operation .
4. Select 2: Sensor .
5. Select 4: Sensor Fault Delay .
6. Follow the on-screen instructions to configure the sensor fault delay.
Update Rate 1
During normal operations, the sampling rate of the fork sensor is set by
Update Rate 1. This is the rate scheduled data is transmitted over the secure
wireless network and can be set to between 4 seconds and 60 minutes.
To change or view the update rate:
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup .
3. Select 1: Wireless
4. Select 3: Broadcast Rates .
5. Select 1: Configure Update Rate .
6. Select 2: Update Rate 1 .
7. Follow the on-screen instructions to configure the update rate.
Fast Keys
2, 2, 2, 2, 4
Fast Keys
2, 2, 1, 3, 1, 2