WirelessHART Rosemount 2160 WirelessHART, Справочное руководство, Страница: 40 / 100

Reference Manual
00809-0100-4160, Rev AB
March 2010
Rosemount 2160
2-22
Calibration Count
See “Counters” on page 2-19 for a description of this parameter.
Reset Calibration
To reset the calibration:
1. From the Home screen, select 3: Service Tools .
2. Select 4: Maintenance .
3. Select 3: Calibrate .
4. Select 2: Reset Calibration .
5. Select Restore Factory Calibration or Restore Site Calibration .
SIMULATION
Sensor Output
The 2160 output state can be overridden by Sensor Output . The output state
can be fixed to Wet or Dry .
To start the output state simulation:
1. From the Home screen, select 3: Service Tools .
2. Select 1: Sensor Output Mode .
3. Select 0.0 (for Dry) or 1.0 (for Wet).
This mode is cancelled by setting the mode to “Normal”, and is cleared by a
power loss or reset.
Fork Frequency
The 2160 fork frequency can be overridden by Fork Frequency. The
frequency can be set to a value in the range 0 to 3000 Hz.
To start the output state simulation:
1. From the Home screen, select 3: Service Tools .
2. Select 2: Fork Frequency .
3. Set the fork frequency.
This override is cancelled by setting the frequency to “Normal”, and is cleared
by a power loss or reset.
Fast Keys
3, 4, 3, 1, 5
Fast Keys
3, 4, 3, 2
Fast Keys
3, 5, 1
Fast Keys
3, 5, 2