WirelessHART Rosemount 2160 WirelessHART Скачать руководство пользователя страница 3

Страница: 3 / 100

Reference Manual

00809-0100-4160, Rev AB
March 2010

Rosemount 2160

www.rosemount.com

Rosemount 2160 WirelessHART

Vibrating Fork Liquid Level Switch

Rosemount 2160 Hardware Revision

HART

Device Revision

Field Communicator Field Device

Dev v1, DD v2

NOTICE

Read this manual before working with the product. For personal and system safety, and for
optimum product performance, make sure you thoroughly understand the contents before
installing, using, or maintaining this product.

For technical assistance, contacts are listed below:

Customer Central

Technical support, quoting, and order-related questions.

United States: 1 800 999 9307 (7:00 am to 7:00 pm CST)

Asia Pacific: 65 777 8211

Europe/ Middle East/ Africa: 49 (8153) 9390

North American Response Center

Equipment service needs.

1 800 654 7768 (24 hours—includes Canada)

Outside of these areas, contact your local Emerson Process Management representative.

The products described in this document are NOT designed for nuclear-qualified
applications.

Using non-nuclear qualified products in applications that require nuclear-qualified hardware
or products may cause inaccurate readings.

For information on Rosemount nuclear-qualified products, contact an Emerson Process
Management Sales Representative.

Replacement equipment or spare parts not approved by Emerson for use as spare
parts could reduce the capabilities of the

2160

, and may render the instrument

dangerous.

• Use spare parts supplied or sold by Emerson

Содержание Rosemount 2160 WirelessHART





































































































Результаты поиска

Содержание Rosemount 2160 WirelessHART

Отзывы:

WirelessHART Rosemount 2160 WirelessHART, Справочное руководство, Страница: 3 / 100

Результаты поиска

Содержание Rosemount 2160 WirelessHART

Отзывы: