blueCompact
Product overview
07/2021
V 01
Red flashing
Signals of LED display
This signal warns of a low battery in the active key.
The signal is activated for the following functions:
•
Internal power function if there is only enough power for a few more
locking transactions.
–
see "Use internal power function", page 15
•
User key function if fewer than 1,000 locking transactions are possible.
–
see "Use user key function", page 15
Warning
Hazard to persons due to malfunction in
emergency opening with an active key.
•
Replace the battery of the active key following
this signal immediately to ensure that the door
does not fail to open or close in an emergency.
•
see "Replace the battery in an active key.",
page 134
Blue flashing
This signal may indicate the following states:
•
Active key has been activated using the button.
•
Active key communicates with other components via Bluetooth.
LED display signals in power adapter mode
The power adapter mode allows cylinders to be locked using the internal
power function and is activated by pressing on the button for 2 seconds.
see "Use internal power function", page 15
Yellow flashing
This signal may indicate the following states:
•
Search for a cylinder which can be taught in
•
Search for a cylinder on which you can perform an internal power
locking transaction
see "Use internal power function", page 15
Green flashing
Key has been taught in and is awaiting connection to cylinder.
Red-yellow flashing
Error in communication with a passive key or cylinder. Repeat procedure.
Green impulse
Active key is authorised to lock.
Red impulse
Active key is not authorised to lock.
14
blueCompact electronic locking system
