Wincor Nixdorf TH420, Руководство пользователя

Страница: 54 / 64

The on-line, paper
status, error LED is
blinking. The slip is jammed. Open the front cover and clear paper
from path.
The carriage is jammed. Open front cover and clear paper from
path.
A jam during flip. If visible through front window, open
access door and clear paper jam, if not,
open front cover and clear jam.
Receipt paper is low. There are about 4.5 meters, ± 3 meters,
(15 feet, ± 10 feet) of paper left. Change
the paper soon to avoid running out of
paper part way through a transaction.
See “Load and change the receipt
paper.”
Thermal print head
temperature is out of
range. The print head may overheat when
printing in a room where the temperature
is above the recommended operating
temperature or when printing high
density graphics continuously, regardless
of the room temperature. In either case,
the printer will shut off. If the temperature
of the print head is too hot, adjust the
room temperature or move the printer to
a cooler location. If the printhead is
overheating because of printing high
density graphics continuously, reduce
the demand on the printer.
AC supply voltage is out
of range. If paper is not low and no conditions
indicate that the thermal print head is too
hot, the power supply voltage is out of
range. Contact a service representative.
Slip-in LED does not light (rec tan gu lar green LED on slip tab le)
Condition Possible causes What to do
LED does not light No check or form inserted
into printer.
Check or form incorrectly
inserted. Ensure the check or form
is aligned properly.
See “Printing on forms or
checks.”
TROUBLESHOOTING THE PRINTER
48