Wincor Nixdorf TH420, Руководство пользователя

Страница: 42 / 64

n
If you would like to continue configuring the printer, select “No”. The
printer returns to the configuration menu where you can set parameters
again.
Com mu ni ca ti on in ter fa ce
To change the communication interface settings (except Ethernet), enter the
configuration menu, select “Set Communication Interface” from the main
menu and answer “Yes” to “SET INTERFACE TYPE?” printed on the
receipt.
Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of
the printer.
Press the paper feed button as instructed to select the communication
interface you want.
n
Communication interface
n
RS-232C in ter fa ce
n
USB (USB or Powered USB)
RS-232C se ri al in ter fa ce set tings
To change the RS-232C serial interface settings, enter the configuration
menu, select “Set Communication Interface” from the main menu and
answer “No” to “SET INTERFACE TYPE?” printed on the receipt. This will
take you to the instructions for selecting the RS-232C settings.
Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of
the printer.
Press the paper feed button as instructed on the configuration menu to
select the RS-232C settings you want to change:
n
Baud rate
115200 baud
57600 baud
38400 baud
19200 baud
9600 baud
4800 baud
COM MU NI CA TI ON IN TER FA CE
36