Wincor Nixdorf TH420, Руководство пользователя

Страница: 45 / 64

En ab le or dis ab le re ceipt test mode
The receipt test mode verifies proper receipt printing. Receipt test is
enabled and disabled by selecting the “Diagnostic Modes” sub-menu of the
configuration menu. See “Configuring the printer”, for instructions on how to
enter the configuration menu.
Do run the Re ceipt test mode
n
Enable the receipt test mode in the configuration menu.
n
Exit the configuration menu.
n
Push the paper feed button. The receipt station prints two code pages
and cuts the receipt.
n
To repeat this test, push the paper feed button again.
To exit the re ceipt test mode
n
Enter the configuration menu again. (See “Configuring the printer”)
n
Disable the receipt test mode.
n
Exit the configuration menu.
The prin ter is on-line and can again com mu ni ca te nor mal ly with the host
com pu ter.
En ab le or dis ab le slip test mode
The slip test mode verifies proper printing on a slip. Slip test is enabled or
disabled by selecting the “Diagnostic Modes” sub-menu of the configuration
menu. See “Configuring the printer” for instructions on how to enter the
configuration menu.
To run the slip test mode
n
Enable the slip test mode in the configuration menu.
n
Exit the configuration menu.
n
Insert a slip into the slip station.
n
Push the paper feed button. Two code pages will be printed.
n
To repeat this test, preform both steps before.
To exit the slip test mode
n
Enter the configuration menu again. (See “Configuring the printer”)
n
Disable the slip test mode.
n
Exit the configuration menu.
The prin ter is on-line and can again com mu ni ca te nor mal ly with the host
com pu ter.
n
39
COM MU NI CA TI ON IN TER FA CE