Wincor Nixdorf TH420, Руководство пользователя

Страница: 24 / 64

If changing the type of paper being used (monochrome vs. two-color
version or manufacturer type), you will need to send the “Set paper type”
(1D 81 m n) command. Use the “Set paper type” (description found in the
Programming Supplement
) or selection in the configuration menu.
n
Open the receipt cover and remove the used roll (if present).
n
Tear off the end of the new roll so that the edge is loose.
n
Place the roll into the paper bucket with the paper unrolling from the
bottom of the roll (6), and with a few inches of paper extending over the
cabinet front.
Paper must unroll from the bottom of the roll to insure that the image will
print.
n
Close the receipt cover while holding the paper over the front of the
cabinet (7).
n
Remove the excess paper by tearing it against the tear-off blade (8).
n
Press the paper feed button to advance the paper if necessary.
LOAD OR CHANGE THE RECEIPT PAPER
18