Wilo IF-module LON, Инструкция по установке и эксплуатации

Страница: 56 / 84

English
49 WILO SE 05/2011
6.2.4 Value ranges and resolutions of the configuration output network variables
6.2.5 Description of the network variables
Object request
network input SNVT_obj_request nviRequest
This input network variable triggers various operations concerning the node and
object status. It consists of 2 bytes, the ID byte and the value byte. The ID byte
indicates the number of the object to which the request applies. The ID value 0
refers to the node object; in this case requests may also affect all other objects.
The ID value 1 refers to the pump-controller object.
Value range
Output
configuration
variable Mandat./
optional CPT / NVT Object Number Value
nciDevMajVer O SCPTdevMajVer 0 165 03
nciDevMinVer O SCPTdevMinVer 0 166 00
nroPumpChar M SCPTpumpCharacteristic 1 233 depends on
pumptype
nciObjMajVer O SCPTobjMajVer 1 167 03
nciObjMinVer O SCPTobjMinVer 1 168 00
Value Function with ID = 0 Function with ID = 1
RQ_NORMAL Normal operation of all objects Normal operation of pump
controller
RQ_DISABLED Stops all objects Stops the pump controller
RQ_ENABLE Enables the node object Enables the pump controller
RQ_UPDATE_STATUS Updates the node object status
(OR operation for all objects) Updates the pump controller
status
RQ_REPORT_MASK Supported node object status
signals (OR operation for all
objects) Supported pump controller
status signals
RQ_CLEAR_STATUS Deletes certain status signals in
all objects Deletes certain pump
controller status signals