Wildlife Acoustics sm3bat Скачать руководство пользователя страница 30

Страница: 30 / 86

SM3BAT Setup

SM3BAT User Guide

page

BIOACOUSTIC MONITORING SYSTEMS

In this example, the unit is currently recording on microphone 1 at a sound
level of 41.1 dB.

Bat 5.9V     Temp 16.70
Mic0: NA     Mic1: U1
0:   ---------------/--
1:*    -41.1dB/--

NOTE

: New alkaline batteries should report 6 or more volts. The screen also shows the

internal temperature of the recorder in degrees Celsius. This is intended for diagnostics

and not to be an accurate measure of outside air temperature.

3.16

Temperature Sensor

The recorder includes an integrated temperature sensor to log temperatures

inside the enclosure. This is intended for diagnostics only. Heat from the circuit

and/or heat from sun on the enclosure can significantly increase the temperature

reading above ambient air conditions.

3.17

The Backup Clock Battery

The backup clock battery for this device is not user-accessible. The clock battery is

pre-installed in all new devices and should last three (3) years with normal use.

During normal operation the D cell batteries (or external power source when

used) supplies power to the clock. The internal battery is only a backup to

preserve the time settings if there is no main power or the SM3BAT is turned

OFF

The unit will still operate properly with a dead clock battery; however, the clock will

need to be reset if the D cells are removed or depleted.

3.18

How to Connect the GPS Time-Synch Option

Use the optional GPS time-synch receiver to calculate the location of wildlife

signals from multiple SM3BAT units and multiple recordings. The optional GPS

time-synch receiver synchronizes the SM3BAT clock to the GPS time base for

extremely accurate time stamping on all your recordings. It also logs the path and

location of the recorder when a recording was made. The GPS coordinates are

logged in a file on the SD card and in metadata inside each recording file.

NOTE

: The GPS receiver does not synchronize recordings when using recording

triggers. You must record continuously to maintain synchronization.

Содержание sm3bat























































































Результаты поиска

Содержание sm3bat

Отзывы:

Похожие инструкции для sm3bat

Бренды по названию

Популярные бренды

Wildlife Acoustics sm3bat, Руководство пользователя

Результаты поиска

Содержание sm3bat

Отзывы:

Похожие инструкции для sm3bat

Бренды по названию

Популярные бренды