36
WIKA operating instructions process transmitter, model UPT-2x
14111166.02 04/2015 EN/DE
EN
8. Configuration via display and operating unit
8.2.4 Setting the density unit and density value
1.
Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2.
Select “Application” and confirm with [↵].
3.
Select “Level” and confirm with [↵].
4.
Select “Density” and confirm with [↵].
5.
Select “Density unit” and confirm with [↵].
6.
Select unit and confirm with [↵].
»
Density unit is set.
7.
Select “Density value” and confirm with [↵].
8.
Set digit using [▲] [▼] and confirm with [↵]. The cursor
moves to the next digit. Repeat for each digit.
»Density value is set.
8.2.5 To set the temperature unit
Temperature unit °C and °F selectable.
1.
Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2.
Select “Application” and confirm with [↵].
3.
Select “Sensor temp.” and confirm with [↵].
4.
Select temperature unit and confirm with [↵].
»
Temperature unit is set.
