WIKA CPH8000 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 85

WIKA CPH8000 Скачать руководство пользователя страница 83

7 Maintenance, cleaning and servicing

WIKA Operating Instruction, Model Pascal ET, ET-P, ET/IS, ET-P/IS 83

GB

7 Maintenance, cleaning and servicing

7.1

Maintenance

The Multichannel Calibrator model Pascal ET, ET-P, ET/IS, ET-P/IS is maintenance-free.
Repairs must only be carried out by the manufacturer.

7.2

Cleaning

CAUTION!

■

Before cleaning, correctly disconnect the Multichannel Calibrator model Pascal ET

or Pascal ET/IS from the pressure supply, and switch it off.

■

Clean the Multichannel Calibrator model Pascal ET, ET-P, ET/IS, ET-P/IS with a

moist
cloth.

■

Electrical connections must not come into contact with moisture.

For information on returning the instrument see chapter “8.2 Return”

7.3

Recalibration

DKD certificate - Certificates:

We recommend that the instrument is regularly recalibrated by the manufacturer, with time
intervals of approx. 12 months. Every factory recalibration includes, additionally, an extensive free-
of-charge check of all system parameters with respect to their compliance with the specification.
The basic settings will be corrected if necessary.

«
...
81
82
83
84
85
»

Содержание CPH8000






















































































Отзывы:

Нет отзывов