WIKA CPH8000, Руководство по эксплуатации, Страница: 35 / 85

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET, ET-P, ET/IS, ET-P/IS 35
GB
The calibrator set the selected option and load the last used unit for the module (in this case the
last used measuring unit was the mV measuring). To change the measuring unit in Rtd press the
key indicated with “Q” in the figure above:
The following screen appears:
Figure 17
– Selecting the unit for module IN A
By selecting the “Rtd” unit the screen changes as follows:
Figure 18
– Module IN A with Rtd unit selected
The calibrator set the unit in Rtd and shows the last used Rtd type (in this case the last used Rtd
type was Pt100 IEC).
It is also possible select an Rtd type “User” if not listed in the pre-defined options.
To select the Rdt type “User” press the button indicated with “Q” on the figure above.
Q