Wieland podis, Системное руководство

Страница: 9 / 100

Wieland podis

system
Manual V 1.03 / ref. no. 00.000.0059.0 / 28.03.2001
1.3 Performance data for flat cable
podis
   
CON is connected to an earthed infeed.
General data
Rated voltage VDE 450/750 V AC
UL 600 V AC
Nominal frequency 50 Hz
Rated current (at 50°C) 16 A
Rated voltage of auxiliary circuit
(L+) 50 V DC
Sheath PVC according to CENELEC HD 21.1
S3, TM5, oil-resistant, LBS-free,
silicone-free
Dimensions mm (H x W) 35 x 6.1 with single-sided coding lug
Cu number (kg/km) 168
Cable weight (kg/km) 402
Ambient temperature (operating) -15°C to +50°C
Connection temperature
(piercing contact) +10°C to +50°C
Behaviour in the event of a fire Self-extinguishing according to
DIN VDE 0472 section 804 B,
IEC 60332-1
Approval (in preparation) VDE, SEV and UL
Main circuit (colour coding: yellow/green, blue, brown, black)
Fuse 16 A with tripping characteristic C
Number of cores x cross section 5 x 2.5 mm
2
based on HD 359 and DIN
VDE 0281 section 404
Conductor Bare copper, highly flexible according to
DIN VDE 0295 class 6, corresponds to
CENELEC HD 383 S2 class 6
Conductor insulation PVC according to CENELEC HD 21.1
S3, TI2, silicone-free
Auxiliary circuit (colour coding: red, white)
Fuse 16 A with tripping characteristic C
Number of cores x cross section 2 x 2.5 mm
2
based on HD 359 and DIN
VDE 0281 section 404
Conductor Bare copper, highly flexible according to
DIN VDE 0295 class 6, corresponds to
CENELEC HD 383 S2 class 6
Conductor insulation PVC according to CENELEC HD 21.1
S3, TI2
1.4 Permitted
use
podis
   
CON may only be operated in networks with an earthed
infeed (TN-S system). A non-earthed configuration of podis

 

systems is not permitted.
The sheath of the flat cable should not show any signs of
damage. Any holes left by the piercing contact should be
sealed. An approved sealing strip (Scotch VM from 3M) may be
used for this purpose.
It is not permitted to operate podis

 

CON with
open flat cable outlets.
The flat cable must be de-energized at the
relevant outlets during installation and
maintenance.
During operation, unused flat cable outlets should either be
sealed using a cover (order no. 07.409.7256.0 for connectors)
or using a cover and a dummy screwed gland at the round
cable outlet.
Specification of the flat cable
Cross section with colour coding
M White
L+ Red
PE Yellow/green
N Blue
L3 Black
L2 Brown
L1 Black
WARNING