Wieland podis MOT FP C, Руководство по эксплуатации

Страница: 50 / 64

7.4 Wieland Electric | BA000349 | 05.2007
Diagnostics (and Fault Removal) | 7
7.3 Replacing the electronics module
The electronics module is built into the hood (electronics cover).
WARNING
All electrical installations and connections may be performed only by trained electri-
cians. The applicable safety and accident prevention regulations must be observed.
Before opening and removing the electronics cover, the entire flat cable must be de-
energized.
Proceed as follows to replace the electronics module:
1. Remove the four fastening screws of the electronics cover.
2. Unplug connector X8.
3. Replace the complete electronics cover with a new one.
4. Set the PROFIBUS address.
4. Plug the connector X8 into the connection in the electronics cover.
5. Attach the electronics cover with the four fastening screws.
• Ensure that the unit is tight and that no connecting cables have been pinched.
• The electronics module has been replaced.
Pluggable connection between
hood and base
Hood with installed electronics
Base with connection technology
(covered by cover plate)
podis ® MOT (opened)