6
1
1.. S
Se
ettttiin
ng
g u
up
p tth
he
e u
un
niitt
Layout of the unit
1. copper rod
2. distance piece
3. silicone seal
4. beaker
5. anode/temperature sensor
6. protective ring
7. front plate (can be opened out)
8. electroforming head mount
9. electroforming head
10. crown coping
11. hotplate cover
Layout of the controls
12. contact
13. channel button for entering
power levels
14. contact LED for corresponding
channel
15. holes for copper rods
16. contact LED for denture base and
residual gold deposition
17. contacts for denture base and
residual gold deposition
18. display for gold electrolyte quan-
tity and remaining electroforming
time
19. channel display (Position)
20. power level display (Level)
21. mode button
22. mode indicator
23. Start/Stop button
24. channel button with contact LED
Buttons and displays
Mode button:
for selecting the desired mode
Mode 1: electroforming
thickness 0.2 mm
or lower denture base
Mode 2: electroforming
thickness 0.3 mm
or upper denture base
Mode 3: residual gold deposition
Mode display
indicates the selected mode by
means of 3 LED displays
Start/Stop button: for starting and stopping the
electroforming process
Display for gold
displays the gold electrolyte quantity
electrolyte quantity and the remaining electroforming
and remaining
time. The unit of the value shown is
electroforming
indicated in the corresponding
time:
status LED (min and ml)
Channel display:
displays the channel selected
(Position)
(and displays error codes)
Power level
displays the power level of the
display: (Level)
channel selected
Channel button:
for setting the required power level
for each channel
Contact LED:
lights up when the corresponding
channel has been selected and
monitors the contacts
