Settings on the unit:
●
Press the mode button to set the desired electrofor-
ming thickness:
Mode 1:
Electroforming thickness 0.2 mm
(operating time: 300 min)
Mode 2:
Electroforming thickness 0.3 mm
(operating time: 415 min)
●
For each part, set the required power level with the
channel buttons next to the contacts.
The selected position with its power level setting is
indicated in the displays (
Position
and
Level
). The unit
computes the quantity of gold electrolyte required. This
is indicated in the display for gold electrolyte quantity
and remaining electroforming time (18). The contact
LED lights up to show every channel set.
The displays
Position
and
Level
disappear 30 seconds
after the last value is entered. The quantity of gold
electrolyte continues to be displayed until “Start” is
pressed.
2
2.. E
Elle
ec
cttrro
offo
orrm
miin
ng
g c
co
op
piin
ng
gs
s ffo
orr c
crro
ow
wn
ns
s,, iin
nlla
ay
ys
s a
an
nd
d o
on
nlla
ay
ys
s
12
Assembly:
Assemble electroforming head, distance piece and sili-
cone seal. Pull the copper rods through the appropriate
holes and arrange the parts as indicated by the arrow
(see assembly diagram).
Assembly diagram:
