All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
46
8.0. Service
8.7. Changing tines
ATTENTION !
Only perform maintenance work
when the TERRA SPIKE is
mounted. Switch off the tractor
and secure it against
unintentional starting.
There is a risk of injury due
to the tine tip.
1.
Place tine holder that is
being worked on in up
position (by pressing on an
upright tine holder).
2.
Release locknut (D).
3.
Hold the tine firmly in one
hand.
4.
Loosen screw (E) until the
tine can be removed
Installation is as described in
Chapter 6.3.
Tighten the hex bolt to a
torque of
28 Nm (20.65 lbf ft)
.
A
B
A
B
870.48
