Wiedenmann SNOW MASTER VARIO FLEX 3370 Series, Перевод оригинальной инструкции по эксплуатации

Страница: 15 / 71

Snow Master Vario Flex 3370
3 Safety notes
02 | 2019 3370 99 01 – 003 15
3.6.8. Operational reliability, perfect technical condition
Operation only after proper commissioning
Without proper commissioning in line with these operating instructions, the operational reliability of the device is not
guaranteed. This can then lead to a risk of serious or even fatal injuries.
 Do not use the device until it has been properly commissioned.
See Section 8 „Before Initial Operation“.
Technically perfect condition of the machine
Improper maintenance and settings can influence the operational reliability of the machine and cause accidents. This can
then lead to a risk of serious or even fatal injuries.

Perform all maintenance and setting/adjustment work in line with the "Maintenance" and "Settings" sections.

Prior to performing any maintenance or setting/adjustment work, shut down and secure the machine, see Section
3.7.1 “Shutting down and securing the device".
Dangers due to damage to the device
Damage to the device can impair its operational reliability and cause accidents. This can then lead to a risk of serious or
even fatal injuries. The following parts of the device are particularly important with regards to safety:

Guards

Coupling devices

Hydraulics
If you are in any doubt regarding the operational condition of the device, for example if it suddenly starts to behave
differently unexpectedly or if you observe visible damage / fluids escaping:
 Shut down and secure the device, see Section 3.7.1 “Shutting down and securing the device".
 Eliminate any potential causes of the damage immediately, such as heavy soiling or loose screws.
 If you encounter damage that affects operational reliability and which you cannot rectify yourself by following the
information/instructions in the operating instructions, please have the equipment repaired by a qualified specialist
workshop.
Technical limits
The device can be damaged if its technical limits are not observed. This can then lead to a risk of serious or even fatal
injuries. Observing the following limits is particularly important in terms of safety:

Maximum permitted hydraulic operating pressure

Maximum permitted tractor axle loads
 Observe the limits, see Section 4.3 “Technical specifications 01 series 3370”.