Snow Master Vario Flex 3370
3 Safety notes
02 | 2019
3370 99 01 – 003
19
Avoid heating near pressurized fluid lines
Do not cause heating near pressurized fluid lines by
welding, soldering or using a torch.
Pressurized fluid lines can be cut through
accidentally if heat develops outside the
immediate area of flame. In addition, heating near
pressurized fluid lines can cause highly
flammable mists to develop. If these mists ignite
they can cause serious burns.
3.6.16.
Hazards when performing certain tasks at the device
Work only on stopped device
If the devie has not been shut down and secured, parts can
move unintentionally or the machine can begin to move.
Maintenance and repair work
Improper servicing and repair work jeopardise operational
reliability. This can then lead to a risk of serious or even fatal
injuries.
Only perform the work described in these operating
instructions.
Prior to performing any work, shut down and secure
the device, see Section 3.7.1 "Shutting down and
securing the device“.
Have all other servicing and repair work performed
exclusively by a qualified specialist workshop.
Raised device or device parts
The raised device or raised device parts can descend or tip over
unintentionally. This can then lead to a risk of serious or even
fatal injuries.
Do not stand or remain below the raised device or
raised device parts that do not have proper supports,
see Section 3.7.1 "Shutting down and securing the
device“.
Prior to performing any work below a raised device or
raised device parts, secure the respective device or
device parts and prevent them from descending using
a rigid safety prop or hydraulic locking device and
suitable supports.
