Snow Master Vario Flex 3370
8 Before Initial Operation
44
3370 99 01 – 003
02 | 2019
8.3.4.
Operating the outer shields
INFO!
Collision zone
= area between attachment and shield in 180° position (90° to direction of travel).
Collision zone
The outer shields can only be actuated if the corresponding inner
shield is not in the collision zone. The buttons (3 / 4) light up
blue.
If a shield part is in the collision zone, the corresponding LEDs
(1 / 2) light up red.
Selecting the left outer shield
Press the selection button (4).
Selecting the right outer shield
Press the selection button (3).
Selecting the left and right outer shields at the same time
Press the selection button (3) or (4) twice.
If the outer shields are moving into their final position, the
corresponding selection button (3) or (4) flashes green.
Ending the outer shield function
Press the selection button (5).
The Vario Flex has hydraulic "collision protection". This means
that in the event of a major collision, the relevant outer and/or
inner shield(s) yield(s) by moving to the rear and remain(s) within
the collision zone.
