Snow Master Vario Flex 3370
8 Before Initial Operation
40
3370 99 01 – 003
02 | 2019
7.8.
Ballast
CAUTION!
Impairment of the tractor's driving characteristics!
Do not exceed the tractor's maximum axle load.
Specifications in the Operating Instructions for the tractor must be observed!
The ability to steer must be maintained.
Loads must always be attached to the mounting points provided in accordance with regulations
When selecting the additional weights, ensure that the permissible axle load weight, as well as the permissible overall
weight including the mounted equipment, is not exceeded.
8.
Before Initial Operation
8.1.
General information initial operation
Familiarise yourself with all equipment and operating elements and their functions before starting work.
In addition to the information provided in these Operating Instructions, please also observe generally applicable
safety and accident-prevention standards
During operation on public highways, the relevant traffic regulations must be observed! Ensure the permissible
front axle load is not exceeded because the steerability of the tractor must be maintained (if necessary, place
weights in position as described in the tractor Operating Manual).
Special care should be taken when working and turning on a slope – DANGER OF TOPPLING – !
Upon receiving the equipment, check to ensure that all the connection pieces have been included.
Observe the technical specifications when attaching the equipment to other tractors.
Observe the warning and information signs on the equipment.
8.2.
Settings on the device
8.2.1.
Adjusting the sliding shoes
Lower the attached rake blade to the ground.
INFO!
Position the skid shoes so that they glide
over the ground and are in contact with the
ground but can still move.
The skid shoes must be aligned with the scraping edge fitted on
an even, firm surface.
Insert locking pin (1) into the relevant hole (2 or 3)
and secure it.
