Wiedamark LSD-100, Руководство пользователя

Страница: 7 / 46

4.2 All-in-one network control system LED Show T9
AIO network interface and control software LED Show T9
This complete set consisting of network interface and the control software [LED Show T9] allows for control
of the displays together with a Windows PC and a gigabit ethernet network card (1000 Mbps). This system
does not require a further video card with DVI output, which makes it ideally suitable for mobile use with a
notebook. The transmission of the data signals with a screen resolution of up to 1280 x 1024 pixels from the
computer to the network interface is done via the supplied network cable. If needed, a standard CAT5e
network cable up to 100 meters long may be used.
For connecting displays the network interface offers eight data signal outputs, each allows control of 128
(width) x 16 (height) pixels. So one network interface can control 128 (width) x 128 (height) pixels in total. A
configuration with 256 (width) x 128 (height) pixels is also possible, however, results in a lower grayscale
resolution and data refresh rate. To built-up a large video wall with several displays (up to 1280 (width) x
1024 (height) pixels are possible), the network interfaces can be connected in series via network cables.
Minimum system requirements
• Windows 2000/XP
• Dual-core CPU >1.8 GHz
• >1 GB disk space
• Separate gigabit ethernet connection (1000 Mbps)
• 1024 x 768 screen resolution
Recommended system requirements
• 2.9 GHz dual-core CPU
• 4 GB disk space
• Realtek network card with RTL chip