Wiedamark LSD-100, Руководство пользователя

Страница: 19 / 46

00061810.DOC, Version 2.1 20/47
6.4 Installation and connection of the PCI sending card for the control system LED
studio
6-4 Installation of the PCI sending card
1
Turn off the computer, disconnect the power plug and remove the case. Take anti-static precautions
(e.g. touch a metal object) to avoid damage to the computer.
2
Insert the sending card into a free PCI slot of the computer. Replace the case.
3
Connect the DVI port of the sending card to the DVI port of the computer via the supplied DVI cable.
4
Connect the USB port of the sending card to the USB port of the computer via the supplied USB cable.
5
Make sure all connections are correctly connected. Apply power to the computer and start it.
6
If the green status LED of the sending card is flashing constantly (about 30 times per second) power
supply and data transmission is established.
Attention! When the computer starts up and the monitor remains black after connecting the sending
card, turn off the computer and disconnect the DVI cable from the sending card. Reboot your
computer and when Windows has loaded, reconnect the DVI cable.