Wiedamark LSD-100, Руководство пользователя

Страница: 3 / 46

Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
1. INTRODUCTION
Thank you for having chosen a
Wiedamark
Soft Display. If you follow the instructions given in this
manual, we are sure that you will enjoy this device for a long period of time.
Software shown in the manual.
LED Show T9
For this user manual, [ LED Show T9 ] was used with [ Version 10.48 ].
Please download the latest software from our website. Wiedamark.com
and
LED Studio
For this user manual, [ LED Studio ] was used with [ Version 10 ].
The software's user manual comes with the network control system.
Please download the latest software from our website. Wiedamark.com
2. SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
Please make sure that there are no obvious transport damages. Should you notice any damages
on the AC connection cable or on the cover, do not take the device into operation and
immediately consult your local dealer.
This device falls under protection-class II and features a protective insulation. The voltage and
frequency must exactly be the same as stated on the device. Wrong voltages or power outlets
can lead to the destruction of the device and to mortal electrical shock.
Always plug in the power plug least. The power plug must always be inserted without force. Make
sure that the plug is tightly connected with the outlet.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution! Never touch them with wet hands, as this
could lead to mortal electrical shock.