00061810.DOC, Version 2.1
19/47
If needed, a standard CAT5e network cable up to 100 meters long may be used (different lengths are
available as accessory).
5
Connection receiver interface receiver interface
The receiver interface's output [
Signal Transfer
] serves for relaying the data signal to the [
Signal
Input
] on the next interface. With [
LED Studio
], four receiver interfaces can be connected in series.
6.3 Connection to the mains
6-3 Example of power cabling
Caution!
Do not connect displays to the mains while they are folded.
1
After having connected all components, connect the power plug of the first display to the mains (90-260
V AC, 50/60 Hz). The [
POWER
] indicator on the AIO network interface or receiver interface lights up
red.
2
For relaying the power supply, remove the cable part with the power plug on the power cables of the
subsequent displays. On all displays, pull out the feed-through cable marked [
AC 90~260 V AC
] from
protective cover and remove the protective caps.
3
Connect the feed-through output of the first display to the 2-pin plug on the power cable of the next
display etc. until you have connected a maximum of 5 displays. The next 5 displays must be connected
to the mains separately.
4
Make sure all connectors are locked firmly.
5
If needed, a 1.5 meter power extension cable may be used (optional accessory).
6
After operation, disconnect the displays from the mains and then loosen all cable connections.
Содержание LSD-100
Страница 1: ...LED Video Curtain U s e r M a n u a l...
