00061810.DOC, Version 2.1
37/47
2
3 a
3
4
6
8
7
1
7-18 Configuration of the displays
1
Select the [
Display Connection
] tab to configure the data connection to the displays.
2
The control software [L
ED Studio
] allows control of a complete video wall (consisting of several
displays). Leave the default value for [
Display QTY
] at [
1
].
3
Based on your cabling, enter the number of horizontal and vertical receiver interfaces in fields
[
Horizontal
card
] and [
Vertical card
]. Now a field is displayed for each receiver interface (
�
3 a
). Click
the fields to separately adjust the following parameters of each receiver interface.
4
Under [
Main cable
], specify for each receiver interface the output used at the sending card: left jack =
[
U
], right jack = [
D
].
5
Based on your cabling, specify the order of the receiver interfaces under [
Order No.
]. Set the first
receiver interface in the data path to number [
1
].
6
Specify the size for each receiver interface in pixels: Enter width and height in the corresponding fields.
7
Transfer your settings to the receiver interface by clicking [
Send to receiver
].
8
Click [
Save to file
] to store your personal settings in RCG format. Make sure you do not overwrite the
original preset file. Save the file under a different file name.
5
Содержание LSD-100
Страница 1: ...LED Video Curtain U s e r M a n u a l...
