00061810.DOC, Version 2.1
15/47
5.4 Disassembly
Step 1:
Disconnect all power connections and all data signal connections.
Step 2:
Loosen all push buttons and then all hook-and-loop connections.
Step 3:
Release all hooks and belts.
Step 4:
Take off the displays from the truss and put them with the back on the ground. You do not have
to pull out the support bars.
Step 5:
The displays can either be folded or rolled. Model LSD-20 is an exception; this model should
be rolled only. Always be careful and do not apply any pressure. Do not bend the circuit boards
but fold the displays in the spaces between the circuit boards. It is best to store the displays in
a case.
EXTEND LIFE SPAN AND PREVENT DAMAGE!
Always fold displays lengthwise with the surface face to face.
Never fold crosswise or back to back.
Do not bend circuit boards!
With larger models that must be folded several times, proceed as follows:
Содержание LSD-100
Страница 1: ...LED Video Curtain U s e r M a n u a l...
