Starting
and
operating
Chapter 5
08.05.2019
Working Instructions WIDOS SPA 600
Page 15 of 42
Connect the heating element with the special plug to the SPA (5).
Connect the power plug of the SPA (4) with one of both plug boxes of the hydraulic aggregate or an
external plug box.
Connect the planer with the remaining plug box of the hydraulic aggregate or an external plug box.
Connect the power plug of the hydraulic aggregate to the mains and be sure to have the correct
voltage (230 V (400 V) / 50 Hz).
5.3.
How to connect the SPA to the hydraulic aggregate from 6100
steel version
Put the SPA onto the hydraulic aggregate (arrow) and screw it (1).
Connect the T-piece (2) to the upper hydraulic connector of the hydraulic aggregate
Connect the suitable hydraulic hose (3) of the basic machine e.g. WIDOS 6100 steel version to this
spot.
Put the special plug of the heating element into the multipolar power socket at the SPA (5) and
secure by the bracket.
Connect the plug (4) of the SPA to the power socket (6) at the hydraulic aggregate.
Connect the mains plug of the hydraulic aggregate to the power supply, observe the correct voltage
(230 V (400 V) / 50 Hz).
2
1
(2)
3
4
6
5
