COOLING FUNCTION
1. For rapid cooling of bottles remove the ice cream bowl and place the bottle directly into the
recess.
2. Select a short operation time 10 minutes and start the appliance. If necessary the cooling time
can be prolonged as described above.
3. The best cooling effect will be reached if the bottle top is covered with an isolating collar.
CLEANING
1. Switch off the appliance and disconnect the plug from the outlet.
2. Do not clean the appliance, the motor block and the cord in or under water.
3. All removable parts except the motor block can be cleaned in warm soapy water.
4. The compressor housing and the motor block can be wiped with a dam cloth.
5. Do not use any sharp or scouring cleaners which might damage the surface of the appliance.
6. Dry all parts carefully before reassembling the appliance.
11
notice_TG570-reso 15/01/06 17:16 Page 11
