Whirlpool WED99HEDC0, Техническое образование

Страница: 52 / 100

4-4
n
HybridCare™ Dryer with Heat Pump Technology
COMPONENT ACCESS
Removing the Top Panel & Console
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
To Remove the Top Panel
1. Unplug dryer or disconnect power.
2. Remove the two (2) 1/4” hex-head screws from the top
panel as illustrated in Figure 1.
Top Panel Screws
Figure 1
3. Lift the rear of the top panel, pull back, and remove top
panel from the dryer.
To Remove the Console
1. After removing the top panel, remove connector P2 from
the CCU and disconnect the in-line connector between
the UI and drum light (see Figure 2).
Drum Light Connector
P2 Connector
Figure 2
2. Remove the two (2) 1/4” hex head screws securing the
console to the cabinet (see Figure 3).
Console Screws
Figure 3
3. Lift up on console and pull out to remove from dryer.