Whirlpool Cabrio WTW6200S, Руководство пользователя

Страница: 24 / 84

3-4
3. Add color-safe bleach, (powdered or liq-
uid) to this dispenser, if needed. Be sure
to match powdered color-safe bleach with
powdered detergent or match liquid color-
safe bleach with liquid detergent.
4. Pour measured liquid chlorine bleach into
the liquid chlorine bleach dispenser, if
needed. Bleach is diluted and automati-
cally dispensed at the proper time during
the wash cycle.
Do not overfill. Do not dilute. Do not use
more than 1 cup (250 mL) for a full load.
Use less with a smaller load size.
Follow the garment and the chlorine
bleach manufacturer’s directions for
proper use.
To avoid spilling, use a cup with a pour-
ing spout. Do not let bleach splash, drip,
or run down into the washer basket.
At the end of the cycle, a small amount
of water may be left in the dispenser.
This is normal.
NOTE: Use only liquid chlorine bleach
in this dispenser.
5. Pour measured liquid fabric softener into
the fabric softener dispenser, if desired.
IMPORTANT: Dilute all fabric softener with
water for a total of 1/2 cup (118 mL)
•
•
•
•
Do not overfill. The dispenser holds
1/2 cup (118 mL).
Do not spill or drip any fabric softener
onto the clothes.
NOTES:
Use only liquid fabric softener in this
dispenser.
Do not use fabric softener dispensing
balls in this washer. Dispensing balls will
not operate correctly with this washer.
6. Close the washer lid.
7. Press POWER. This turns on the washer
display.
8. Select a Wash Cycle. See “Cycles.”
9. Adjust the Modifiers, if desired. See “Modi-
fiers.”
10. Select desired Options. See “Options.”
11. On some models, select Delay Wash, if
desired. See “Delay Wash” in the “Modi-
fiers” section.
12. Press START. The wash cycle begins, and
the display shows the estimated remaining
time. The lid will lock.
NOTE: If you do not press Start within 5
minutes of pressing Power, the washer
automatically drains and shuts off.
PAUSING OR RESTARTING
THE WASHER
ADD A GARMENT
You can place additional clothing in the wash
when the “Add a Garment” status light is glow-
ing without sacrificing wash performance.
To add a garment or pause the washer at
any time:
1. Press PAUSE/CANCEL once.
2. Wait until the Lid Lock light turns off, then
open the lid.
3. Add items.
•
•
•
•