Whip Mix VeriPulse IOS Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 58

background image

VeriPulse IOS User Manual

51

8.8 During Systems Operation

WARNING:

The VeriPulse IOS system contains delicate optical and

mechanical elements and therefore should be handled carefully. Do
not drop, bump, or shake the handpiece or the tip. Always place the
handpiece on the base when not in use. Do not put stress on the cable
connecting the handpiece to the base. Do not submerge the handpiece
or the base in any liquid. Do not place the handpiece or the base on
wet or heated surfaces. Hold the handpiece with a firm grip when
handling it.

WARNING:

In order to prevent over-heating of the system, the

ventilation opening at the bottom of the handpiece should never be
obstructed.

NOTE:

During operation of the system, the handpiece and the tip may

get slightly warm; this is normal.

8.9 EMC Guidance and Declaration

WARNING:

Portable RF communication equipment (including peripherals such as

antenna cables and external antennas) should not be used within 30 cm of any part of the
VeriPulse IOS, including cables specified by the MANUFACTURER. Otherwise, performance
degradation of this equipment may occur.

WARNING:

Use of this equipment adjacent to or on other equipment must be avoided as it

may result in improper operation. If this use is necessary, it is advisable that this and the other
equipment be observed to verify that they are operating normally.

VeriPulse IOS Performance:

Under normal use, the VeriPulse IOS should be transmit images

to the laptop/notebook with the installed image manipulation software and User Manual the
video stream is visible in the bottom left corner of the screen. If not used properly, there may
be loss of transmission of image information or slow transmission temporarily.

Accessories

WARNING:

Only use Whip Mix approved accessories. Not using Whip Mix approved

accessories may result in deterioration of performance.

Accessory

Whip Mix Part Number

USB 3.0 Cable

79278

AC/DC Power Adapter

79279

«
...
49
50
51
52
53
...
»

Содержание VeriPulse IOS



























































Отзывы:

Нет отзывов

Похожие инструкции для VeriPulse IOS

Бренд: Rain-Flo Irrigation Страницы: 20

Attest Auto-reader 390

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

PELTOR WS LiteCom Plus

Бренд: 3M Страницы: 7

Steri-Vac GS Series

Бренд: 3M Страницы: 52

Бренд: DAKO Страницы: 25

Бренд: 3M ESPE Страницы: 50

Бренд: VACGEN Страницы: 13

Бренд: Baker Страницы: 82

Бренд: Baroness Страницы: 40

Бренд: Baroness Страницы: 40

Бренд: BARKO LOADERS Страницы: 85

Бренд: Warehouse-lighting Страницы: 3

Бренд: Eagle Group Страницы: 8

Бренд: E2S Страницы: 5

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды