15
Pro Series
Furnace Operations Manual
SELECT ITEM:
CAL LOW FUSING
Figure 6
LOW OvERFIRES?
NO
Figure 7
LOW TEMP ADJ
0C
Figure 8
SELECT ITEM:
CAL HIGH FUSING
Figure 9
HIGH OvERFIRES?
NO
Figure 10
HIGH TEMP ADJ
0C
Figure 11
Adjust Low-Fusing Porcelain
Calibration (800° C/1470° F or below)
1. Press the
Special Functions
button.
2. Turn the
Select Knob
until display reads
CAL LOW FUSING.
6. Turn the
Select Knob
to enter a temperature to
adjust. If YES was selected in the previous step, this
value will adjust the temperature downward. If NO was
selected, this value will adjust the temperature upward.
3. Press the
Next
button. The display will ask
LOW OVERFIRES?
4. Turn the
Select Knob
to display either YES or NO.
Selecting YES will allow you to adjust for low-fusing
porcelain
overfires
. Selecting NO will allow you to
adjust for low-fusing porcelain
underfires
.
5. Press the
Next
button.
7. Press the
Next
button.
Example:
If your porcelain appears to be overfired
by 25°, you would answer YES to question 3, then turn
the
Select Knob
to 25° and Press the
Next
button.
Now, fire again. If your porcelain appears to be un-
derfired by 10° after making the 25° adjustment, you
would again answer YES, then change the 25° to 15°.
Adjust High-Fusing Porcelain
Calibration (800° C/1470° F or above)
1. Press the
Special Functions
button.
2. Turn
Select Knob
until display reads
CAL HIGH FUSING.
6. Turn the
Select Knob
to enter the number of de-
grees
you would like to adjust the temperature. If YES was
selected in the previous step, this value will adjust
the temperature downward. If NO was selected, this
3. Press the
Next
button. The display will ask
HIGH OVERFIRES?
4. Turn the
Select Knob
to display either YES or NO.
Selecting YES will allow you to adjust for high-fusing
porcelain
overfires
. Selecting NO will allow you
to adjust for high-fusing porcelain
underfires
.
5. Press the
Next
button.
value will adjust the temperature upward.
7. Press the
Next
button to accept the displayed value.
Example:
If your porcelain appears to be overfired by
25°, you would answer YES to question 3, then dial to
25° and press the
Next
button. Now, fire again. If your
porcelain appears to be underfired by 10° after making
the 25° adjustment, you would again answer YES, then
change the 25° to 15°.
15946 Pro Series English.indd 15
5/9/08 2:51:10 PM