16
Pro Series
Furnace Operations Manual
CAL PRESS TEMP.
Figure 12
PRESS OvERFIRES?
YES
Figure 13
Printing Forms
This function enables easy printing of a currently running
program or the last run program. To use this function press
the
Special Function
button, turn the
Select Knob
to
PRINT FORM and press the
Next
button. If the furnace
Adjust Press (Temp.) Calibration
(Pro Press 100 only)
(This procedure will adjust the Pressing Program
temperature on the Pro Press 100 only.)
1. Press the
Special Functions
button.
2. Turn the
Select Knob
until the display reads
CAL PRESS TEMP.
4. Turn the
Select Knob
to select either YES or NO.
Selecting YES will allow you to adjust for pressing
overfires. Selecting NO will allow adjusting for
Pressing
underfires.
5. Press the
Next
button. Turn the
Select Knob
to
enter the number of degrees you would like to adjust
the temperature. If YES was selected, this value will
adjust the temperature downward. If NO was selected,
this value will adjust the temperature upward.
6. Press the
Next
button to accept the displayed value.
3. Press the
Next
button. The display will ask,
PRESS OVERFIRES?
Transferring Programs to
Other Furnaces
This furnace has been designed to make it very easy to copy
your programs to other furnaces. This feature is especially
helpful if you have several furnaces. You need to program
only one furnace, then use a “Red Smart Box” to transfer
the programs to your other furnaces. This feature will copy
all programs and will overwrite any programs on the furnace
they are transferred to.
Contact your dealer to obtain a “Red Smart Box” and follow
these directions to transfer your programs:
1. Locate the printer/program port door on the right side
of the furnace. Remove the door.
2. With the printer/program port door removed, plug the
“Red Smart Box” into the parallel port.
3. Press the
Special Functions
button.
4. Turn the
Select Knob
to the left until the display reads
PROGRAMS BOX. Make sure the arrow is pointing
to the word BOX.
5. Press the
Next
button.
6. The display will read SENDING NOW… When the
transfer is finished, remove the “Red Smart Box,” and
take it to the furnace to load the programs into.
ANY PORCELAIN NAMES OR PROGRAMS THAT
ARE ON THE SECOND FURNACE BEFORE THE
TRANSFER WILL BE REPLACED.
7. Plug the “Red Smart Box” into the second furnace.
Press the
Special Functions
button. Turn the
Select Knob
to the left until the display reads
PROGRAMS BOX. Make sure the arrow is
pointing to the word PROGRAMS.
8. Press the
Next
button.
9. The programs will be copied to the second
furnace. When the transfer is complete,
remove the “Red Smart Box.”
is currently running a program, that program and its inform-
ation will print out. If the furnace has just finished running a
program and the furnace button has not been touched since
the program was run, that program will be printed out.
15946 Pro Series English.indd 16
5/9/08 2:51:10 PM
