Whelen Engineering Company IPS 400, Руководство по эксплуатации продукта

Страница: 39 / 44

Siren Command Definitions
Command Function
___________________________________________________________________________
00H Clear
Clears any event in progress.
01H Wail Tone Warning.
02H Attack Tone Warning.
03H Alert Tone Warning.
04H Public Address Live Public Address.
05H Air-Horn Tone Warning.
06H Hi-Lo Tone Warning.
07H Whoop Tone Warning.
08H Wail-2 (noon test) Tone Warning, short tone.
09H North Positioning command to North.
0AH East Positioning command to IPSt.
0BH South Positioning command to South.
0CH West Positioning command to West.
0DH Clockwise Positioning command to increment 45
°
clockwise.
0EH Counter clockwise Positioning command to increment 45
°
counter-clockwise.
0FH Silent test Initiates the diagnostic Silent Test, producing a Status response.
10H Clear Clears any event in progress.
11H Message 13 Initiates digital voice message 13, for an RSDVM module.
12H Message 14 Initiates digital voice message 14, for an RSDVM module.
13H Message 15 Initiates digital voice message 15, for an RSDVM module.
14H Message 16 Initiates digital voice message 16, for an RSDVM module.
15H Rotor position Rotor/speaker position request.
16H Counter Tone activation software counter request.
17H Clear counter Clears the software tone activation counter to zero.
18H Arm system Arms the Instant Status response.
19H Dis-arm system Disables the Instant Status response.
1AH Siren on Enables the tone generator and digital voice.
1BH Siren off Disables the tone generator, digital voice is active.
1CH Signal/Noise Req. Executes the Signal to Noise check in a Remote Siren.
1DH Signal/Noise Status Signal to Noise reading request.
1EH Test Clear Clears LEDs
1FH Status Request Retrieves the Status byte.
20H Clear Clears any event in progress.
21H Battery/AC Requests battery voltage and AC voltage mIPSurements.
22H Battery/Temperature Requests battery voltage and cabinet temp. mIPSurements.
23H Instant Status Get real time (instant) status of Remote Siren Station.
24H Transmit Off Disables the transmit repeat feature during Instant Status.
25H Strobe Test StrobeVisor™ only. 4 to 5 flash test period.
26H not used
27H Wind Shift
Greatest directional shift, on a sliding 10 minute window.
28H Reset Wind & Temp. Resets the wind and temperature values.
29H Reset Rainfall Resets the rainfall value.
2AH Weather Requests outside temperature, wind direction, wind speed, and rainfall.
2BH Temperature Requests cabinet temperature, outside temperature, low peak, and high peak
(peak values since last reset).
2CH Wind Requests wind direction, speed, and peak (peak value since last reset).
2DH Rainfall Requests totalized rainfall since last reset.
2EH Humidity Requests the humidity reading.
2FH Barometer Requests the barometric pressure.